Search This Supplers Products:Beauty equipment
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
- group name
- Oxygen Facial Machine
- Min Order
- 1 piece
- brand name
- Aesmed
- model
- AM-S1
- payment method
- Western Union, T/T, Paypal
- update time
- Mon, 25 Nov 2024 03:40:31 GMT
Paramtents
Vacuum 100KPA
Frequency 2.2khz ( deep skin)
Frequency 4.5Khz (middle layer)
Frequency 6.0 Khz (surface layer)
Packging & Delivery
- 48cm x65cm x55cm
-
Min Order1 piece
Briefing
Remove acne 、Deep cleansing ；Whitening 、Allergies, water deficiency, wrinkles in the corners of the mouth and eyes
Detailed
Ce Approved Spa Use Portable Oxygen jet peel Facial Machine
Skin Tightening
Spray Oxygen Teratment
Spray Oxygen Teratment function:
supply oxygen treatments and moisture for the skin rapidly,smooth skin,lightening stains,improve chlorosis,dull conditions,make skin rosy,white,transparent,tender,tightening indeed,with special spa oils will be better.
Inject Oxygen Treatment
Inject Oxygen Treatment function:
through the high pressure inject oxygen,activating the activity of skin cells and improve the metabolism of skin cells,and anti-aging,whitening,cured dark cycles,acne,to improve sensitive skin
Bio-photon electricity Treatment
BIO Treatment
Mechanism:
BIO sine wave work handle has calming,soothing and firming effect, shirnk pores,soothopain and reduce the swelling excrete by the process of metabolism, and the vessal and nurve will not be damaged.
Skin Tightening
Spray Oxygen Process
1. MIX 2-3 drip SPA essential oil diluted with purified water into small cup of the oxygen sprayer,water should be about 2/3 of the cup,and then tightly.Oxygen sprayer can only with liquid products,other states product will cause pinhole jam.
2. Set work time.The system default time is 30 minutes.Click on the “30”once to increase 10 minutes.The range is 1-120 minutes,15-20 minutes each part.
3. Click on the oxygen injection to return to the interface of operation.
BIO-Photon Electricity Process
1. Click on “Bio-Photon electricity” enter interface.
2. Apply gel or essence on treatemt area.
3. Set work time.20 minutes each part.
4. The system default is “Bio-electricity”,and the output steps is 1.
5. Click on "Cooling Photon”enter interface.The system default mode is P1,P1(slow)to P4(quick) is piusemode,P5 is constant mode.
Inject Oxygen Process
1. Click on “Inject Oxygen”enter interface.
2. Set work time.About 20 minutes for facial treatment,eye-care for about 15 minutes,the body part about 20 minutes.
3. Set frequency.The system default frequency is 5 Hz.
4. Oxygen injector has four working caps,choose appropriate caps according to different treated parts.
BIO Operation Process
1. Click on“BIO”enter interface.
2. Set work time.10 minutes each part.
3. Clean and apply gel or essence on treatment area.
4. Set BIO intensity.The system default intensity is 1,the range is 1(weak)-10(strong).
Product Paramenters
|
Input Voltage
|
AC 220V/50Hz AC110V/60Hz
|
Frequency
|
2.2khz ( deep skin)
|
|
Output power
|
135VA
|
Frequency
|
4.5Khz (middle layer)
|
|
Ambient temperature
|
5°C~+40°C
|
Frequency
|
6.0 Khz (surface layer)
|
|
Vacuum
|
100KPA
|
Display
|
Touch Screen
|